page . 1 november 22,2012-rev.06 p4sma series features ? for surface mounted applications in order to optimize board space ? glass passivated junction ? low inductance ? plastic package has underwriters laboratory flammability classification 94v-o ? high temperature soldering : 260c /10 seconds at terminals ? lead free in comply with eu rohs 2011/65/eu directives ? green molding compound as per iec61249 std. . (halogen free) mechanical data ? case: jedec do-214ac,molded plastic over passivated junction. ? terminals: solder plated,solderable per mil-std-750, method 2026 ? polarity: color band denotes cathode end ? standard packaging:12mm tape (eia-481) ? weight: 0.002 ounce, 0.064 gram maximum ratings and electrical characteristics ratings at 25c ambient temperature unless otherwise specified. notes : 1. non-repetitive current pulse, per fig.3 and derated above t a = 25 o c per fig. 2. 2. mounted on 5mm 2 copper pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minutes maximum. 4. lead temperature at 75 o c = t l . 5. peak pulse power waveform is 10/1000 s. 6. a transient suppressor is selected according to the working peak reverse voltage (v rwm ), which should be equal to or greater than the dc or continuous peak operating voltage level. devices for bipolar applications for bidirectional use c or ca suffix for types p4sma6.8 thru types p4sma250. electrical characteristics apply in both directions. surface mount transient voltage suppressor power 400 watts break down voltage 6.8 to 250 volts rating symbol value units peak pulse power dissipation on t a = 25 o c (notes 1,2,5, fig.1) p pp 400 watts peak forward s urge current per f ig.5 (notes 3) i fsm 40 amps peak pulse current on 10/1000 s waveform (notes 1)fig.2 i ppm see table 1 amps typical thermal resistance junction to air (notes 2) r ja 70 o c / w operating junction and storage temperature range t j ,t stg -55 to +150 o c 0.062(1.60) 0.047(1.20) 0.181(4.60) 0.157(4.00) 0.114(2.90) 0.098(2.50) 0.060(1.52) 0.030(0.76) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) 0 012(0 305) 0006(0.152)
page . 2 november 22,2012-rev.06 p4sma series part number reverse stand-off voltage breakdown voltage te s t current reverse leakage max. clamp voltage 10/1000 s peak pulse current 10/1000 s marking code v rwm (notes 6) v br @ i t i t i r @ v rwm v c @ i pp i pp min. max. uni bi uni bi v v v ma a a v a uni bi 400w transient voltage suppressor p4sma6.8 p4sma6.8c 5.5 6.12 7.48 10 1000 2000 10.8 38 mza nza p4sma6.8a p4sma6.8ca 5.8 6.45 7.14 10 1000 2000 10.5 40 mzb nzb p4sma7.5 p4sma7.5c 6.05 6.75 8.25 10 500 1000 11.7 36 mzc nzc p4sma7.5a p4sma7.5ca 6.4 7.13 7.88 10 500 1000 11.3 37 mzd nzd p4sma8.2 p4sma8.2c 6.63 7.38 9.02 10 200 400 12.5 33 mze nze p4sma8.2a p4sma8.2ca 7.02 7.79 8.61 10 200 400 12.1 35 mzf nzf p4sma9.1 p4sma9.1c 7.37 8.19 10 1 50 100 13.8 30 mzg nzg p4sma9.1a p4sma9.1ca 7.78 8.65 9.5 1 50 100 13.4 31 mzh nzh p4sma10 p4sma10c 8.1 9 11 1 10 20 15 28 mzj nzj p4sma10a p4sma10ca 8.55 9.5 10.5 1 10 20 14.5 29 mzk nzk p4sma11 p4sma11c 8.92 9.9 12.1 1 5 10 16.2 26 mzl nzl p4sma11a p4sma11ca 9.4 10.5 11.6 1 5 10 15.6 27 mzm nzm p4sma12 p4sma12c 9.72 10.8 13.2 1 1 1 17.3 24 mzn nzn p4sma12a p4sma12ca 10.2 11.4 12.6 1 1 1 16.7 25 mzp nzp p4sma13 p4sma13c 10.5 11.7 14.3 1 1 1 19 22 mzq nzq p4sma13a p4sma13ca 11.1 12.4 13.7 1 1 1 18.2 23 mzr nzr p4sma15 p4sma15c 12.1 13.5 16.5 1 1 1 22 19 mzs nzs p4sma15a p4sma15ca 12.8 14.3 15.8 1 1 1 21.2 20 mzt nzt p4sma16 p4sma16c 12.9 14.4 17.6 1 1 1 23.5 18 mzu nzu p4sma16a p4sma16ca 13.6 15.2 16.8 1 1 1 22.5 19 mzv nzv p4sma18 p4sma18c 14.5 16.2 19.8 1 1 1 26.5 16 mzw nzw p4sma18a p4sma18ca 15.3 17.1 18.9 1 1 1 25.2 17 mzx nzx p4sma20 p4sma20c 16.2 18 22 1 1 1 29.1 14 mzy nzy psma20a p4sma20ca 17.1 19 21 1 1 1 27.7 15 mzz nzz p4sma22 p4sma22c 17.8 19.8 24.2 1 1 1 31.9 13 mxa nxa p4sma22a p4sma22ca 18.8 20.9 23.1 1 1 1 30.6 14 mxb nxb p4sma24 psma24c 19.4 21.6 26.4 1 1 1 34.7 12 mxc nxc p4sma24a p4sma24ca 20.5 22.8 25.2 1 1 1 33.2 13 mxd nxd p4sma27 p4sma27c 21.8 24.3 29.7 1 1 1 39.1 11 mxe nxe p4sma27a p4sma27ca 23.1 25.7 28.4 1 1 1 37.5 11.2 mxf nxf p4sma30 p4sma30c 24.3 27 33 1 1 1 43.5 10 mxg nxg p4sma30a p4sma30ca 25.6 28.5 31.5 1 1 1 41.4 10 mxh nxh p4sma33 p4sma33c 26.8 29.7 36.3 1 1 1 47.7 9 mxj nxj p4sma33a p4sma33ca 28.2 31.4 34.7 1 1 1 45.7 9 mxk nxk p4sma36 p4sma36c 29.1 32.4 39.6 1 1 1 52 8 mxl nxl p4sma36a p4sma36ca 30.8 34.2 37.8 1 1 1 49.9 8.4 mxm nxm p4sma39 p4sma39c 31.6 35.1 42.9 1 1 1 56.4 7.4 mxn nxn p4sma39a p4sma39ca 33.3 37.1 41 1 1 1 53.9 7.8 mxp nxp p4sma43 p4sma43c 34.8 38.7 47.3 1 1 1 61.9 6.8 mxq nxq
page . 3 november 22,2012-rev.06 p4sma series part number reverse stand-off voltage breakdown voltage te s t current reverse leakage max. clamp voltage peak pulse current marking code v rwm (notes 6) v br @ i t i t i r @ v rwm v c @ i pp i pp min. max. uni bi uni bi v v v ma a a v a uni bi 400w transient voltage suppressor p4sma43a p4sma43ca 36.8 40.9 45.2 1 1 1 59.3 7.1 mxr nxr p4sma47 p4sma47c 38.1 42.3 51.7 1 1 1 67.8 6.2 mxs nxs p4sma47a p4sma47ca 40.2 44.7 49.4 1 1 1 64.8 5 mxt nxt p4sma51 p4sma51c 41.3 45.9 56.1 1 1 1 73.5 5.7 mxu nxu p4sma51a p4sma51ca 43.6 48.5 53.6 1 1 1 70.1 6 mxv nxv p4sma56 p4sma56c 45.6 50.4 61.6 1 1 1 80.5 5.2 mxw nxw p4sma56a p4sma56ca 47.8 53.2 58.8 1 1 1 77 5.5 mxx nxx p4sma62 p4sma62c 50.2 55.8 68.2 1 1 1 89 4.7 mxy nxy p4sma62a p4sma62ca 53 58.9 65.1 1 1 1 85 5 mxz nxz p4sma68 p4sma68c 55.1 61.2 74.8 1 1 1 98 4.3 mya nya p4sma68a p4sma68ca 58.1 64.6 71.4 1 1 1 92 4.6 myb nyb p4sma75 p4sma75c 60.7 67.5 82.5 1 1 1 108 3.9 myc nyc p4sma75a p4sma75ca 64.1 71.3 78.8 1 1 1 103 4.1 myd nyd p4sma82 p4sma82c 66.4 73.8 90.2 1 1 1 118 3.6 mye nye p4sma82a p4sma82ca 70.1 77.9 86.1 1 1 1 113 3.7 myf nyf p4sma91 p4sma91c 73.7 81.9 100 1 1 1 131 3.2 myg nyg p4sma91a p4sma91ca 77.8 86.5 95.5 1 1 1 125 3.4 myh nyh p4sma100 p4sma100c 81 90 110 1 1 1 144 2.9 myj nyj p4sma100a p4sma100ca 85.5 95 105 1 1 1 137 3.1 myk nyk p4sma110 p4sma110c 89.2 99 121 1 1 1 158 2.7 myl nyl p4sma110a p4sma110ca 94 105 116 1 1 1 152 2.8 mym nym p4sma120 p4sma120c 97.2 108 132 1 1 1 173 2.4 myn nyn p4sma120a p4sma120ca 102 114 126 1 1 1 165 2.5 myp nyp p4sma130 p4sma130c 105 117 143 1 1 1 187 2.2 myq nyq p4sma130a p4sma130ca 111 124 137 1 1 1 179 2.3 myr nyr p4sma150 p4sma150c 121 135 165 1 1 1 215 2 mys nys p4sma150a p4sma150ca 128 143 158 1 1 1 207 2 myt nyt p4sma160 p4sma160c 130 144 176 1 1 1 230 1.8 myu nyu p4sma160a p4sma160ca 136 152 168 1 1 1 219 1.9 myv nyv p4sma170 p4sma170c 138 153 187 1 1 1 244 1.7 myw nyw p4sma170a p4sma170ca 145 162 179 1 1 1 234 1.8 myx nyx p4sma180 p4sma180c 146 162 198 1 1 1 258 1.6 myy nyy p4sma180a p4sma180ca 154 171 189 1 1 1 246 1.7 myz nyz p4sma200 p4sma200c 162 180 220 1 1 1 287 1.5 mwa nwa p4sma200a p4sma200ca 171 190 210 1 1 1 274 1.5 mwb nwb p4sma220 p4sma220c 175 198 242 1 1 1 344 1.2 mwc nwc p4sma220a p4sma220ca 185 209 231 1 1 1 328 1.2 mwd nwd p4sma250 p4sma250c 202 225 275 1 1 1 360 1.1 mwe nwe p4sma250a p4sma250ca 214 237 263 1 1 1 344 1.2 mwf nwf
page . 4 november 22,2012-rev.06 p4sma series
page . 5 november 22,2012-rev.06 p4sma series mounting pad layout order information ? packing information t/r - 7.5k per 13" plastic reel t/r - 1.8k per 7" plastic reel
page . 6 november 22,2012-rev.06 p4sma series part no_packing code_version p4sma6.8_r1_00001 p4sma6.8_r2_00001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 7 november 22,2012-rev.06 p4sma series disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
|
